ERA White Cement Adhesive | Fixing Vitrified, Ceramic Tiles on Walls
Dush ERA WHITE is a cement-based adhesive used to fix vitrified ceramic tiles on walls and any other vertical surface. It has high strength bonding, waterproof effect, fast settling, and non-yellowing. It is suitable for both internal and external applications.
Sizes - 20 Kg
Colors - White/Regal Grey/Snow White/Dove Grey
Area of Use - Marble, Granite, Tiles & Natural Stones.
Product Features:
1. Speedy marble installation on wall
& flooring
2. Dush ERA White is a revolutionary
product for a quick and robust installation of marble, granite & natural
stones on walls.
Instruction for Use:
1. All surfaces must be clean, dry,
and free from dust, grease, wax, oil, laitance, curing compounds, and all other
contaminants likely to prevent the adhesive bonding. Concrete should be allowed
to cure for at least 30 days, and cement renders 8 days prior to tiling.
2. 10 kg of Dush Era White powder
requires approximately 2.5 Litre of water which produces 7 Litre of mixed
products.
Add a measured amount of clean water
into a clean container and sprinkle Era powder slowly into the liquid while
constantly stirring.
3. Eliminate lumps.
4. Mix to a thick toothpaste
consistency. Allow standing for 2 minutes then remixing.
5. The adhesive is now ready to use.
Apply the mixed adhesive to the prepared substrate using the appropriate
notched trowel for the size of the tile, Marble & Natural Stone being laid.
6. A minimum of 1mm bed thickness for
walls and 3mm for floors must be achieved.
7. Ensure that the bedded tiles are
fully supported by the adhesive with no void’s underneath or behind. Lay tiles
onto the adhesive before it skins.
8. The adhesive may also need to be applied to the back of the tiles to accommodate the required levels. Do not disturb tiles till the adhesive has dried.
No.451, 1st Floor, 9th A Main, 2nd
Block, Jayanagar, Bangalore, Karnataka - 560011
Email- india@dushproducts.com
Comments
Post a Comment